Can I Afford This Property?Commercial real estate financing, worked out

Documenting differences between leased area and rentable building area

This guide explains how to prepare a clear reconciliation of leased area versus rentable building area for a commercial real estate loan request, including a concrete worksheet and evidence checklist.

Source: CodexTopic: Commercial lease analysis1353 wordsUpdated 2026-11-19

This guide explains how to prepare a clear reconciliation of leased area versus rentable building area for a commercial real estate loan request, including a concrete worksheet and evidence checklist.

Why the area difference matters to lenders

When you submit a loan request for an office or medical office property, lenders examine how the building's total rentable area compares with the sum of all individual leased areas. A mismatch between these figures affects the net operating income (NOI) and the debt service coverage the lender can underwrite. Office buildings are usually leased on a gross basis with the tenant typically responsible for expenses directly related to occupancy such as utilities and janitorial [1]. Because lease terms vary, the lender must know exactly which square footage each tenant occupies and how that relates to the building's total rentable area. A documented reconciliation helps the lender verify that the rent roll is complete and that no space is double-counted or omitted.

What to record: the rentable building area

Start with the building's official rentable building area (RBA) as defined in the appraisal or the property's rentable area schedule. This is the total square footage available for lease, excluding common areas, mechanical rooms, and other non-rentable spaces. Record this figure in a single cell on your worksheet. If the building has multiple floors or wings, list each separately and sum them. The RBA should match the figure used in the most recent appraisal or the property's offering memorandum. If the RBA has changed due to a renovation or reconfiguration, attach the architect's or engineer's verification.

What to record: the leased area per tenant

For each tenant, record the leased area as stated in the signed lease agreement. This may be a specific suite number and square footage, or it may be a pro-rata share of the floor. If the lease uses a different measurement standard (for example, usable area instead of rentable area), note that on the worksheet. Medical office buildings have unique requirements, including additional plumbing and wiring to accommodate examination room fixtures and equipment, which affects tenant improvement costs and lease terms [1]. For medical office tenants especially, the leased area may include shared waiting rooms or lab spaces that are not part of the tenant's exclusive use area. Make sure the lease explicitly defines the leased area.

How to reconcile the two figures

Create a simple two-column table in your workpaper. In the left column, list each tenant's leased area from the lease. In the right column, list the same tenant's allocated share of the building's rentable area if the lease uses a different basis. Sum both columns. The total leased area from leases should equal the building's RBA, plus or minus any vacant space. If the sum of leased areas is less than the RBA, the difference is vacant rentable area. If the sum exceeds the RBA, there may be double-counting or a measurement error. Identify any discrepancies and explain them in a note. For example, a tenant may have expanded into adjacent space not yet reflected in the building's RBA schedule.

How the reconciliation affects the financing discussion

Lenders use the rent roll to calculate effective gross income, which is the starting point for NOI. If the rent roll shows more leased area than the building can physically accommodate, the lender will question the accuracy of the income stream. Conversely, if the rent roll understates the leased area, the lender may underwrite a lower NOI than the property actually produces. For the sponsor, a clean reconciliation demonstrates that you have a reliable rent roll and that the property's income is accurately represented. This can support the lender's underwriting confidence in the loan request.

Concrete worksheet: area reconciliation workpaper

Prepare a workpaper with the following sections:

  1. Building identification: Property name, address, date of worksheet.
  2. Rentable building area: Source (appraisal, architect, owner), total square footage, date of measurement.
  3. Tenant schedule: For each tenant: tenant name, suite number, lease start and end dates, leased area per lease, measurement standard (usable or rentable), any notes on shared or common area.
  4. Reconciliation calculation: Sum of leased areas from leases, plus vacant rentable area, equals total rentable building area. Show the arithmetic.
  5. Discrepancy notes: If the sum does not match, explain the difference. For example, "Tenant B's lease shows 2,000 square feet, but the building's RBA schedule allocates 2,100 square feet to that suite due to a common area factor. The lease is being amended to reflect the correct figure."
  6. Supporting documents: Attach copies of each lease page that shows the leased area, and the building's rentable area schedule from the appraisal or property records.

Evidence checklist for the loan request

Before you submit the loan request, confirm that you have the following items:

  • [ ] Current rent roll showing tenant name, suite, leased area, rent, and lease expiration.
  • [ ] Copy of each lease or a lease abstract showing the leased area and measurement standard.
  • [ ] Building rentable area schedule from the most recent appraisal or property survey.
  • [ ] Reconciliation worksheet as described above.
  • [ ] Any correspondence or amendments that address discrepancies between the lease and the building's area schedule.
  • [ ] For medical office buildings, documentation of any shared or common areas that affect the leased area calculation.

How timing affects the rent roll and trailing twelve months

A current rent roll is a snapshot of the property's occupancy at a single point in time. It shows who is in the building and how much space they lease. A trailing twelve months (T-12) of operating statements shows the actual income collected over the past year. The two documents may not match because the rent roll reflects the current lease terms, while the T-12 includes historical collections that may include rent from tenants who have since moved out or changes in leased area due to expansions or contractions. When comparing totals, adjust the T-12 to reflect only the current leased area. For example, if a tenant expanded from 1,000 to 1,500 square feet six months ago, the T-12 will show six months of rent at the old rate and six months at the new rate. The lender will want to see the current annualized rent based on the current leased area.

Distinguishing income and expense line items

When you present the property's financials, separate these items clearly:

  • Gross rent: The total contractual rent before any deductions.
  • Collected income: The actual cash received, after accounting for vacancies, concessions, and bad debt.
  • Net operating income (NOI): Collected income minus operating expenses (property taxes, insurance, maintenance, management fees, utilities paid by landlord, and replacement reserves).
  • Capital expenditures (capex): Major improvements such as roof replacement, HVAC upgrades, or tenant improvements that are not recurring operating expenses.
  • Debt service: The annual principal and interest payments on the loan.
  • Equity cash flow: NOI minus debt service and capex, representing the return to the sponsor.

Frequently asked questions

How do I handle a tenant whose lease uses usable area instead of rentable area?

Record the usable area from the lease and then apply the building's common area factor to convert it to rentable area. The common area factor is typically stated in the lease or the building's operating documents. Show both figures on your worksheet and explain the conversion.

What if the building's rentable area has changed since the last appraisal?

Attach the documentation that supports the change, such as an architect's letter, a revised floor plan, or a survey. Update the rentable building area on your worksheet and note the date of the change. The lender will want to verify that the new area is consistent with the physical building and the rent roll.

Do I need to reconcile every lease if the building is fully occupied?

Yes. Even if the building is fully occupied, the lender needs to confirm that the sum of leased areas matches the rentable building area. A fully occupied building can still have discrepancies if a lease uses a different measurement standard or if a tenant's space was reconfigured without updating the building's records. A clean reconciliation shows that your rent roll is accurate and reliable.

Run the numbers on your deal

Try your own NOI, value and lender tests to see which one limits the loan: DSCR, LTV or debt yield.

Open the loan sizing calculator

Talk through your financing

Working on a real property? Send us the deal and a financing advisor will review it and get back to you. It costs nothing to ask and does not commit you to anything.

Contact us

Requests are reviewed by Wraith Real Estate, a commercial real estate debt advisor (not a lender).

Sources

  1. OCC Commercial Real Estate Lending handbook
  2. Wraith commercial real estate debt